Therefore, 10 parameters were listed to be followed to standardize future studies. A wide variation in research methods affected the fracture toughness reported for Y-TZP ceramics among the

selected studies; single-edge-precracked beam and chevron-notched-beam seem to be the most recommended methods to determine Y-TZP fracture toughness; the indentation methods have several limitations. Clinical significance: The accurate calculation of toughness values is fundamental because selleck chemicals overestimating toughness data in a clinical situation can negatively affect the lifetime of the restoration. “
“Purpose: The aim of this study was to evaluate a denture base resin containing silver colloidal nanoparticles through morphological analysis to check the distribution and dispersion of these particles in the polymer and by testing the silver release in deionized water at different time periods. Materials and Methods: Selleck A769662 A Lucitone 550 denture resin was used, and silver nanoparticles were synthesized by reduction of silver

nitrate with sodium citrate. The acrylic resin was prepared in accordance with the manufacturers’ instructions, and silver nanoparticle suspension was added to the acrylic resin monomer in different concentrations (0.05, 0.5, and 5 vol% silver colloidal). Controls devoid of silver nanoparticles were included. The specimens were stored in deionized water at 37°C for 7, 15, 30, 60, and 120 days, and each solution was analyzed using atomic absorption spectroscopy. Results: Silver was not detected in deionized water regardless of the silver nanoparticles added to the resin and of the storage period. Micrographs showed that with lower concentrations, the distribution of silver nanoparticles was reduced, whereas their dispersion was improved in the

polymer. Moreover, after 120 days of storage, nanoparticles were mainly located on the surface of the nanocomposite specimens. Conclusions: Incorporation of silver nanoparticles in the acrylic resin was evidenced. Moreover, silver was not detected by the detection limit of the atomic absorption spectrophotometer used in this study, even see more after 120 days of storage in deionized water. Silver nanoparticles are incorporated in the PMMA denture resin to attain an effective antimicrobial material to help control common infections involving oral mucosal tissues in complete denture wearers. “
“Purpose: The objective of this study was to compare the effect of veneering porcelain (monolithic or bilayer specimens) and core fabrication technique (heat-pressed or CAD/CAM) on the biaxial flexural strength and Weibull modulus of leucite-reinforced and lithium-disilicate glass ceramics. In addition, the effect of veneering technique (heat-pressed or powder/liquid layering) for zirconia ceramics on the biaxial flexural strength and Weibull modulus was studied. Materials and Methods: Five ceramic core materials (IPS Empress Esthetic, IPS Empress CAD, IPS e.max Press, IPS e.max CAD, IPS e.