The mechanism appears to be the coaction of a positive dielectric dipole decreasing the barrier and the tunneling resistance increasing the barrier. Consequently, this is a promising method to increase the NCT-501 solubility dmso performance of SiC electronic applications. Acknowledgments This work was supported by the NSFC (61076114, 61106108, and 51172046), the Shanghai Educational Develop Foundation (10CG04), SRFDP (20100071120027), the Fundamental Research Funds for the Central Universities, and the S&T Committee of Shanghai (1052070420). References 1. Morkoc H, Strite S, Gao GB, Lin ME, Sverdlov B, Burns M: Large-band-gap GM6001 concentration SiC, III-V

nitride, and II-VI ZnSe-based semiconductor device technologies. J Appl Phys 1994, 76:1363.CrossRef 2. Poter LM, Davis RF, Bow JS, Kim MJ, Carpenter RW: Chemistry, microstructure, and electrical properties at interfaces between thin films of cobalt and alpha (6H) silicon carbide (0001). J Mater Res

1995, 10:26.CrossRef 3. Rideout VL: A review of the theory and technology for ohmic contacts to group III-V compound semiconductors. Solid-State Electron 1975, 18:541.CrossRef 4. Connelly D, Faulkner C, Clifton PA, Grupp DE: Fermi-level depinning for low-barrier Schottky source/drain transistors. Appl Phys Lett 2006, 88:012105.CrossRef 5. Coss BE, Loh WY, Oh J, Smith G, Smith C, Adhikari H, Sass-man B, Parthasarathy S, Selleckchem Ferrostatin-1 Barnett J, Majhi P, Wallace RM, Kim J, Jammy R: CMOS band-edge schottky barrier

heights using dielectric-dipole mitigated (DDM) metal/Si for source/drain contact resistance reduction. In Digest of Technical Papers – Symposium on VLSI Technology. Piscataway: Lck IEEE; 2009:104. 6. Lin JYJ, Roy AM, Nainani A, Sun Y, Saraswat KC: Increase in current density for metal contacts to n-germanium by inserting TiO 2 interfacial layer to reduce Schottky barrier height. Appl Phys Lett 2011, 98:092113.CrossRef 7. Kobayashi M, Kinoshita A, Saraswat K, Wong HSP, Nishi Y: Fermi level depinning in metal/Ge Schottky junction for metal source/drain Ge metal-oxide-semiconductor field-effect-transistor application. J Appl Phys 2009, 105:023702.CrossRef 8. Nishimura T, Kita K, Toriumi A: A significant shift of Schottky barrier heights at strongly pinned metal/germanium interface by inserting an ultra-thin insulating film. Appl Phys Express 2008, 1:051406.CrossRef 9. Lieten RR, Degroote S, Kuijk M, Borghs G: Ohmic contact formation on n-type Ge. Appl Phys Lett 2008, 92:022106.CrossRef 10. Hu J, Saraswat KC, Wong HSP: Metal/III-V Schottky barrier height tuning for the design of nonalloyed III-V field-effect transistor source/drain contacts. J Appl Phys 2010, 107:063712.CrossRef 11. Hu J, Saraswat KC, Wong HSP: Experimental demonstration of In0.53Ga0.47As field effect transistors with scalable nonalloyed source/drain contacts. Appl Phys Lett 2011, 98:062107.CrossRef 12.