J Appl Phys 2012,111(10):104307.CrossRef 22. Petrov MI, Melehin VG, Zhurikhina VV, Svirko YP, Lipovskii AA: Dissolution of metal nanoparticles in glass under a dc electric

field. J Phys D: Appl Phys 2013,46(4):045302.CrossRef 23. Dussauze M, Kamitsos E, Fargin E, Rodriguez V: www.selleckchem.com/products/c188-9.html Refractive index distribution in the non-linear optical layer of thermally poled oxide glasses. Chem Phys Lett 2009,470(1–3):63.CrossRef Competing interests The authors declare that they have no competing interest. PARP inhibitor cancer Authors’ contributions ISS conducted SNOM, AFM, and spectroscopy measurements. AKS supervised the experiments and participated in data processing. MIP developed the models used. VVR prepared the samples from ion exchange until their annealing in hydrogen and performed the numerical calculations. AAL supervised the whole work starting from sample preparation to analysis of data. All authors read and approved the final manuscript.”
“Background Magnesium aluminate (MgAl2O4) spinel transparent ceramic has been considered as an important optical material due to its good mechanical properties and excellent transparency find more from visible light to infrared wavelength range [1]. However, it is well known that their intrinsic fracture toughness (premature failure due to brittle fracture) [2–4] limits their wide applications in severe environments. Therefore, there has been great interest in the investigation of ceramic materials with improved toughness [5–8]. In particular,

it has been believed that nanostructured ceramics may have greatly improved mechanical properties when compared with their conventional large-grained counterparts [9]. In our previous work [10, 11], we employed a novel technique to study the fabrication of nanostructured transparent ceramics.

Dehydratase Moreover, we analyzed the transparency mechanism in these ceramics. Nanoindentation is a powerful technique widely employed to determine the mechanical properties of nanostructured materials [12, 13]. However, during the past decades, nanoindentation test has been widely utilized to measure the mechanical properties of numerous materials including polycrystalline ceramics [14–16] rather than those of nanostructured transparent ceramics. In this paper, we use the nanoindentation technique to probe the mechanical properties of nanostructured transparent MgAl2O4 ceramics. Methods High-purity nanostructured transparent MgAl2O4 ceramics with a grain size of approximately 40 nm, fabricated by high pressure-temperature sintering [10], were selected as the test material for the present study. The mechanical properties of ceramic samples were characterized using a nanoindentation technique (Hysitron Inc., Minneapolis, MN, USA). Nanoindentation experiments were carried out on the samples with a diamond Berkovich (three-sided pyramid) indenter. In all loading-unloading cycles, loading and unloading lasted 2 s, respectively, and with a pause at a maximum load (P max) of 5 s.