The migration rates of polymer and PQDs were compared to validate the success of QDs’ surface coating. Effects of pH and ionic strength on the stability of PQDs In order to evaluate the effects of a wide pH range and high salt concentration on the colloidal stability of the PQDs, the PQD colloids were dispersed in varied pH buffers, PQDs/buffer = 1:1 (v/v), and pH ranged from 2 to 13 (Additional file 1: details of preparation MX69 in vivo of a series of buffer solutions). The resulting PL spectra were background-corrected, integrated, and normalized to the intensity

of PQDs in pH = 7, set as 100%. The stability effect of ionic strength was carried out as follows: dispersions of PQDs were placed in fluorescence cuvettes (1-cm optical path) containing an equal concentration of PQDs but various concentrations of sodium chloride. The lack of volumes was replenished with deionized water (pH = 7). The PL emission from PQDs without NaCl added was set to 100%. The resulting PL spectra were normalized to the emission form slat-free solution. Preparation of BRCAA1 antibody- and Her2 antibody-conjugated QD nanoprobes The BRCAA1 monoclonal antibody was conjugated with red PQDs, whereas humanized Her2

monoclonal antibody was conjugated with green PQDs. The optimum mole ratio of PQDs to antibody is 5:3 [31]. The cross-linking reaction was done by using standard EDC-NHS procedure in ambient temperature and dark place for 2 h with continuous see more mixing. The mixture was then purified by chromatography (Superdex 75, Pharmacia Biotech, AB, Uppsala, Sweden) to remove the free antibody residues. The resultant BRCAA1 antibody- and Her2 antibody-conjugated PQDs were stored at 4°C for later use. Afterward, the prepared PQDs and specific monoclonal antibody conjunction were analyzed in 8% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE, Beyotime, Shanghai, China). The gel was run in a standard SDS buffer for 90 min at 120 V. Firstly, the gel was imaged with

UV light to determine PQD position, and then, the gel was stained with Coomassie Brilliant Blue fast staining others solution and imaged with white light to determine protein position. The coupling rate of the PQDs and monoclonal antibody was estimated by a NanoDrop device (Thermo Scientific, Wilmington, DE, USA). Before coupling reaction, we measured the total concentration of monoclonal antibody. After coupling reaction, we estimated the monoclonal antibody concentration in the eluenting phase of chromatography and calculated the coupling rate according to the following equation: BRCAA1 antibody- and Her2 antibody-conjugated QDs for targeted imaging of MGC803 cells in vitro The PD173074 concentration overnight incubated MGC803 and GES-1 cells were fixed with 4% paraformaldehyde for 10 min and permeated with 0.5% (v/v) Tween-20 for 20 min. Then, these cells were blocked for 20 min in PBS containing 1% (w/v) BSA.