However, most of the participants have not received any training on how to use ACT and how to report adverse effects arising from the use of ACT. There is need for more training
of health care professionals to ensure correct and effective use of ACT.”
“These days an alternative to soft capsules is liquid-filled hard capsules. Their filling technology was investigated earlier with highly viscous formulations, while hardly any academic research focused on low-viscosity systems. Accordingly, this work addressed the filling of such oils that are splashing during the dosing process. It was aimed to first study capsule filling, using middle-chain triglycerides as reference oil, in order to then evaluate the concept of a new theoretical splashing degree for different oils. A laboratory-scale filling machine was used that Bcl-2 activation included capsule ALK inhibitor sealing. Thus, the liquid encapsulation by microspray technology was employed to seal the dosage form. As a result of the study with reference oil, the filling volume and the temperature were found to be significant for the rate of leaking capsules. The filling volume was also important for weight variability of the capsules. However, most critical for this variability was the diameter of the filling nozzle. We proposed a power law for the coefficient of weight variability as a function of the nozzle diameter
and the obtained exponent agreed with the proposed theory. Subsequently, a comparison learn more of different oils revealed that the relative splashing degree shared a correlation with the coefficient of the capsule weight variability (Pearson product moment correlation of r = 0.990). The novel theoretical concept was therefore found to be predictive for weight variability of the filled capsules. Finally, guidance was provided for the process development of liquid-filled capsules using low-viscosity oils.”
“Monoalkoxysubstituted and dialkoxysubstitued thiophene monomers were synthesized by the nucleophilic substitution and transetherification reactions. Electrochemical homopolymerization of 3-octyloxythiophene (OOT) and
3,4-dioctyloxythiophene (DOOT), copolymerization of OOT with DOOT were performed via potentiodynamic and potentiostatic methods in the supporting electrolyte. Both the copolymer and homopolymers were characterized via cyclic voltammetry, scanning electron microscopy, gel permeation chromatography, and spectroelectrochemical analysis. In the redox process of the polymers, it was linear relationship between the peak current and the scanning rate in their cyclic voltammograms. The copolymer of P(OOT-co-DOOT) showed obvious change of color between red and bright blue in reduced and oxidized states, that has a great difference with the homopolymers. The morphology studies indicated that the electrochemical deposition of P(OOT-co-DOOT) proceeds via a mechanism of nucleation and two-dimensional growth. (C) 2011 Wiley Periodicals, Inc.