The CLs examined in this study are described in detail in Table 1. CLs of the minor FDA Group 3 (ionic/low water) were not included in this study, because the physicochemical properties of these CLs are similar to that of the FDA Group 4. Instead, two widely used silicone hydrogel CLs (FDA Group 1)

Volasertib order with different characteristics were selected. In all cases, unused CLs were removed from the original package and washed with sterile isotonic saline prior to use in the biofilm model. For the sake of consistency, all CLs exhibited a power of -3.00 dioptre. Table 1 Properties of hydrogel contact lenses used in this study Proprietary name ACUVUE 2 PROCLEAR BIOFINITY AIROPTIX United States Adopted Name (USAN) Etafilcon A Omafilcon A Comfilcon A Lotrafilcon B Manufacturer Johnson & Johnson Cooper Vision Cooper Vision CIBA Vision Water content (%) 58 62 48 33 Ionic learn more charge Ionic Non-ionic Non-ionic Non-ionic Oxygen permeability (Dk) 22 27 128 110 Centre thickness

(mm) -3.00 D 0.084 0.065 0.08 0.08 Oxygen transmissibility (Dk/t) at 35°C 33.3 42 160 138 Basis curve (mm) 8.7 8.6 8.6 8.6 Diameter (mm) 14.0 14.2 14.0 14.2 Surface treatment None None None 25-nm-thick plasma coating with high this website refractive index FDA Group 4 (Conventional hydrogel) 2 (Conventional hydrogel) 1 (Silicone hydrogel)α 1 (Silicone hydrogel)β Replacement and wearing schedule* Every 2 weeks (daily wear) OR six nights extended wear Every 4 weeks (daily wear) Every 4 weeks (daily, continuous OR flexible wear) Every 4 weeks (daily wear) OR up to six nights extended wear Principal

monomers HEMA, MA HEMA, PC FM0411M, HOB, IBM, M3U, NVP, TAIC, VMA DMA, TRIS, siloxane monomer HEMA (poly-2-hydroxyethyl methacrylate); MA (methacrylic acid); PC (phoshoryl choline); DMA (N,N-dimethylacryl amide); TRIS (trimethylsiloxy silane); DMA, N,N-dimethylacrylamide; FM0411M (α-methacryloyloxyethyl iminocarboxyethyloxypropyl-poly(dimethylsiloxy)-butyldimethylsilane); HOB (2-hydroxybutyl methacrylate); IBM (isobornyl methacrylate); M3U αω -bis(methacryloyloxyethyl iminocarboxy ethyloxypropyl)-poly(dimethylsiloxane)-poly(trifluoropropylmethylsiloxane)-poly(ω methoxy- poly(ethyleneglycol)propylmethylsiloxane); NVP (N-vinyl pyrrolidone); TAIC (1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione); VMA (N-Vinyl-N-methylacetamide) Methocarbamol α third silicone generation β first silicone generation *It is recommended that the CL wearer first be evaluated on a daily wear schedule. If successful, then a gradual introduction of extended wear can be followed as determined by the prescribing Eye Care Practitioner. Artificial tear fluid A mixture of human blood serum (20% v/v) and lysozyme (2 g/L, Sigma Aldrich, Steinheim, Germany) diluted in an ocular irrigation solution BSS® (balanced salt solution, Delta Select GmbH, Dreieck, Germany) was used as artificial tear fluid.