The number of probes per cell was calculated based on the total photon count with the subtraction of the background count. The calibration of the set-up was performed by collection of luminescence light from a thin layer of the probes solution excited directly by the laser beam at the right angle from the bottom of a thin fused silica substrate. The microscope field of view in these experiments was 14 × 14 μm2. To achieve homogeneity of the excitation beam, the beam was http://www.selleckchem.com/products/nutlin-3a.html passed through a 0.32 cm2 diaphragm. The pulse energy was measured after the diaphragm (0.32 mJ pulse−1).

This allowed a reliable determination of the laser light fluence. Measured volume of the probes solutions (1.12 mM Probe 1-Eu3+ or 0.107 mM Probe 4-Tb3+) in glycerol was placed on the top of the substrate and spread upon the surface with a cover slip (the spot area of 3.80 cm2 and the thickness of the layer of 2.63 μm). The luminescence Etoposide light intensity was calculated based on the photon fluence, the absorption cross-sections of the probes at 351 nm (2.1 × 10−17 cm2 molecule−1 and 3.6 × 10−17 cm2 molecule−1 for probes Eu3+ and Tb3+respectively), the luminescence quantum yield (0.167 for Eu3+[14], and ca. 0.45 for Tb3+ probe), and the total number of probes in the field-of-view area. This was compared with the total

number of photons counted in the image. This procedure allowed determination of the calibration coefficients, which lump sum the solid angle of light collection of the objective lens, the microscope throughput coefficient, the photocathode quantum efficiency, as well as the photon counting efficiency. The average number of the probes per externally labeled E. coli cells determined in this way was 2.1 × 105 and 2.9 × 105 for Eu3+ and Tb3+ probes,

respectively. Externally labeled CHO cells were prepared in a similar manner. The cells were labeled with ADP ribosylation factor avidin conjugates carrying multiple Eu3+ chelates of probe 1 with an average 1.6 × 107 probes per cell. The detection of light emission of a lanthanide chelates and their conjugates with avidin as well as of BODIPY-modified avidin was performed in a measuring cell 150 μl) in a buffer containing 10 mM Hepes pH 8.0. Water-based or deuterium oxide-based solutions were used. In our previous study [15], we found a convenient modification reaction for the cs124CF3 fluorophore, which allows introduction of the crosslinking groups at N1 position. Here we performed the same reaction with parent cs124 compound in order to obtain probe 4 (Fig. 1). Similarly to corresponding trifluoro-derivative, alkylation of cs124 fluorophore by bifunctional biphenyl compound produced alkylation product at N1 with high yield (Fig. 2). Notably, alkylation proceeded almost exclusively at N-1 of the quinolone ring, while the same reactions with ethyl ester of 4-toluenesulfonic acid or with 1-iodo-3-azidopropane yielded detectable amount of O-alkylated products (15).