(C) 2011 Elsevier B.V. All rights reserved.”
“Background: The aim of this study was to evaluate whether plate fixation with screws Stattic in an oblique fashion would change the strength of the fixation to bending forces and whether any relationship existed between deformity and increased strength of fixation.\n\nMethods: Rear leg tibias from 2-year to 3-year-old sheep were affixed with the help of a custom-made

guide to a six-hole dynamic compression plate and divided into three groups. In group 1, fixation was performed using screws perpendicular to the plate axis in two planes. In group 2, screws were placed at a 20-degree angle to the axis of the shaft and perpendicular to the transverse plane. In group 3, the screws were placed at a 20-degree angle to the shaft axis and 7 degrees on the transverse plane. Gap-close bending and side-bending tests were performed in a three-point bending fashion. The maximum moment of force and deformation at the time of the failure was analyzed.\n\nResults: In gap-close bending tests, mean maximum moment of forces for groups 1, 2, and 3 was 51.90 Nm, 67.47 Nm, 82.05 Nm, respectively (p < 0.05 for group 1 vs. groups 2 and 3; p = 0.053

for group 2 vs. group 3). In side-bending tests, the mean maximum moment of force was 34.63 Nm, 49.91 Nm, and 49.29 Nm, respectively (p < 0.05 for group 1 vs. groups 2 and 3; no significant difference was observed between groups 2 and 3). When the two bending tests were evaluated together, Galardin only the mean moment of forces of groups 1 and 3 were statistically different (p = 0.006). There was no difference between any groups in terms find more of the deformity at the time of the maximum moment of force.\n\nConclusion: Oblique

screw placement in two planes increases the strength of the plate-screw fixation under bending forces; however, there is no relationship between deformity and increased strength of fixation.”
“Objectives: A systematic literature review and meta-analysis on the validity (test-retest reliability and accuracy) of automated threshold audiometry compared with the gold standard of manual threshold audiometry was conducted. Design: A systematic literature review was completed in peer-reviewed databases on automated compared with manual threshold audiometry. Subsequently a meta-analysis was conducted on the validity of automated audiometry. Methods: A multifaceted approach, covering several databases and using different search strategies was used to ensure comprehensive coverage and to cross-check search findings. Databases included: MEDLINE, Scopus, and PubMed; a secondary search strategy was the review of references from identified reports. Reports including within-subject comparisons of manual and automated threshold audiometry were selected according to inclusion/exclusion criteria before data were extracted.